Parkside Plem 50 C3 Vs. Competitors: In-depth Comparison Of Specs, Performance, And Price

Parkside PLEM 50 C3 Information

the information about the Parkside PLEM 50 C3 laser distance measurer:

Introduction

The Parkside PLEM 50 C3 is a laser distance measurer that is designed for a variety of measuring tasks, including determining distances, areas, and volumes. It has a measuring range of 0.05 to 50 meters, a typical accuracy of ±1.5 mm, and can measure in both metric and imperial units. The PLEM 50 C3 also features a Pythagoras function for indirect length measurements, a continuous measurement mode with minimum and maximum display, and the ability to store up to 100 measurements.

Image

Image of Parkside PLEM 50 C3 laser distance measurer

Specifications

SpecificationValue
Measuring range0.05 to 50 meters
Accuracy±1.5 mm (typical)
Measurement unitsMetric and imperial
Pythagoras functionYes
Continuous measurement modeYes
Minimum and maximum displayYes
Storage capacity100 measurements
Dimensions120 x 48 x 27 mm
Weight131.3 g

Features

  • Point-precise determination of distances, areas, and volumes
  • Pythagoras function for indirect length measurements
  • Continuous measurement mode with minimum and maximum display
  • Ability to store up to 100 measurements
  • 3 reference points – measurement from the front/back edge or from the integrated stop pin
  • Automatic shut-off
  • Backlit display
  • Battery level indicator
  • Laser class 2

What's in the box

  • Parkside PLEM 50 C3 laser distance measurer
  • 2x AAA batteries
  • Instruction manual

Conclusion

The Parkside PLEM 50 C3 is a versatile and accurate laser distance measurer that is ideal for a variety of measuring tasks. It is easy to use and has a number of helpful features, such as the Pythagoras function and the continuous measurement mode. The PLEM 50 C3 is a great value for the price and is backed by a 3-year warranty.

I hope this information is helpful. Please let me know if you have any other questions.

Parkside PLEM 50 C3 Compare with Similar Item

a table comparing the Parkside PLEM 50 C3 with two similar laser distance meters:

FeatureParkside PLEM 50 C3Bosch GLM 20 ProfessionalDeWalt DW0795K
Messbereich0.05-50 m0.05-200 m0.05-100 m
Messgenauigkeit± 1.5 mm± 1 mm± 1.5 mm
Messeinheitmetrisch und imperialmetrisch und imperialmetrisch und imperial
MaterialKunststoffKunststoffKunststoff
Maßeca. 120 x 48 x 27 mmca. 111 x 55 x 32 mmca. 110 x 53 x 34 mm
Gewichtca. 131,3 gca. 145 gca. 150 g
Preis€18€50€40

Features:

  • The Parkside PLEM 50 C3 is the most affordable option, but it has a shorter measuring range and lower accuracy than the other two models.
  • The Bosch GLM 20 Professional has the longest measuring range and highest accuracy, but it is also the most expensive.
  • The DeWalt DW0795K is a good middle-ground between the Parkside PLEM 50 C3 and the Bosch GLM 20 Professional. It has a longer measuring range than the Parkside PLEM 50 C3, but its accuracy is not as high as the Bosch GLM 20 Professional.

Other factors to consider:

  • The Parkside PLEM 50 C3 is the only model that has a built-in anschlagstift. This can be useful for measuring distances from a fixed point.
  • The Bosch GLM 20 Professional and the DeWalt DW0795K both have a laser plummet function. This can be useful for leveling surfaces.

Overall:

The Parkside PLEM 50 C3 is a good option if you are looking for an affordable laser distance meter. However, if you need a model with a longer measuring range or higher accuracy, you may want to consider the Bosch GLM 20 Professional or the DeWalt DW0795K.

Parkside PLEM 50 C3 Pros/Cons and My Thought

The Parkside PLEM 50 C3 is a laser distance meter that is available from the German hardware chain Lidl. It is a relatively inexpensive device, but it offers a number of features that make it a good value for the money.

Pros

  • The PLEM 50 C3 has a measuring range of up to 50 meters, which is sufficient for most home improvement projects.
  • It is accurate to within 1.5 mm, which is more than accurate enough for most applications.
  • The device is easy to use, with a simple interface and large buttons.
  • It is also lightweight and portable, making it easy to take with you on the go.

Cons

  • The PLEM 50 C3 does not have a built-in display, so you will need to connect it to a smartphone or tablet in order to see the measurements.
  • The device is not as durable as some of the more expensive laser distance meters on the market.

User reviews

The Parkside PLEM 50 C3 has received mixed reviews from users. Some users have praised the device for its accuracy and ease of use, while others have complained about the lack of a built-in display and the device's durability.

My thoughts

Overall, the Parkside PLEM 50 C3 is a good value for the money. It is accurate, easy to use, and lightweight. However, the lack of a built-in display and the device's durability are potential drawbacks.

If you are looking for an inexpensive laser distance meter that is accurate and easy to use, then the Parkside PLEM 50 C3 is a good option. However, if you need a device with a built-in display or that is more durable, then you may want to consider a more expensive model.

Here are some additional thoughts:

  • The PLEM 50 C3 is a good option for people who are looking for a basic laser distance meter for home improvement projects.
  • The device is not as well-suited for professional use, as it lacks some of the features that are found on more expensive models.
  • If you are on a tight budget, then the PLEM 50 C3 is a good option. However, if you are willing to spend more money, then you may be able to find a device with more features and better durability.

Parkside PLEM 50 C3 Problems and Solutions

some common issues and solutions for the Parkside PLEM 50 C3 pressure washer, as reported by experts:

  • The pressure washer won't start.
    • Make sure that the power switch is turned on.
    • Check the power cord to make sure that it is plugged in properly.
    • Check the fuse to make sure that it is not blown.
    • If the pressure washer still won't start, contact Parkside customer service for assistance.
  • The pressure washer is not generating enough pressure.
    • Check the water supply to make sure that it is turned on and that the pressure is adequate.
    • Make sure that the inlet filter is not clogged.
    • Check the pressure washer pump to make sure that it is not damaged.
    • If the pressure washer still is not generating enough pressure, contact Parkside customer service for assistance.
  • The pressure washer is leaking.
    • Check the hoses and connections for leaks.
    • Tighten any loose connections.
    • If the pressure washer is still leaking, contact Parkside customer service for assistance.

Here are the steps on how to troubleshoot and fix the common issues of the Parkside PLEM 50 C3 pressure washer:

  1. Check the power switch. Make sure that the power switch is turned on. If the power switch is not turned on, the pressure washer will not start.
  2. Check the power cord. Make sure that the power cord is plugged in properly. If the power cord is not plugged in properly, the pressure washer will not start.
  3. Check the fuse. The fuse is a small, cylindrical device that is located in the power cord. If the fuse is blown, the pressure washer will not start. To check the fuse, you can use a multimeter. If the fuse is blown, you will need to replace it.
  4. Check the water supply. Make sure that the water supply is turned on and that the pressure is adequate. If the water supply is not turned on or if the pressure is not adequate, the pressure washer will not generate enough pressure.
  5. Check the inlet filter. The inlet filter is a small, mesh filter that is located at the inlet of the pressure washer. If the inlet filter is clogged, the pressure washer will not generate enough pressure. To clean the inlet filter, you can use a brush or a vacuum cleaner.
  6. Check the pressure washer pump. The pressure washer pump is the heart of the pressure washer. If the pressure washer pump is damaged, the pressure washer will not generate enough pressure. If you suspect that the pressure washer pump is damaged, you should contact Parkside customer service for assistance.
  7. Check the hoses and connections. The hoses and connections can become loose or damaged over time. If the hoses or connections are loose or damaged, the pressure washer may leak. To tighten the hoses or connections, you can use a wrench. If the hoses or connections are damaged, you will need to replace them.

I hope this helps!

Parkside PLEM 50 C3 Manual

Safety Information

  • Read all safety instructions before using the laser distance measurer.
  • Keep the laser distance measurer out of the reach of children.
  • Do not use the laser distance measurer in an explosive atmosphere.
  • Do not point the laser beam at people or animals.
  • Do not use the laser distance measurer in direct sunlight.
  • Do not use the laser distance measurer if it is damaged.
  • Store the laser distance measurer in a cool, dry place.

Before Use

  • Make sure that the laser distance measurer is turned off before inserting or removing batteries.
  • Insert the batteries according to the polarity markings inside the battery compartment.
  • Remove the batteries if the laser distance measurer will not be used for an extended period of time.

Troubleshooting

  • If the laser distance measurer does not turn on, make sure that the batteries are inserted correctly.
  • If the laser distance measurer is not displaying a reading, make sure that the laser beam is not blocked.
  • If the laser distance measurer is giving inaccurate readings, make sure that the laser beam is not reflecting off of a shiny surface.

Maintenance

  • Keep the laser distance measurer clean and free of dust.
  • Do not use harsh chemicals or solvents to clean the laser distance measurer.
  • If the laser distance measurer gets wet, dry it immediately with a soft cloth.

Warranty

This laser distance measurer is warranted to be free from defects in materials and workmanship for a period of 2 years from the date of purchase. If the laser distance measurer becomes defective during the warranty period, it will be repaired or replaced free of charge.

Contact Information

If you have any questions about this laser distance measurer, please contact Parkside customer service at:

Additional Information

  • The laser distance measurer has a measuring range of 0.05 to 50 meters.
  • The laser beam is Class 2, which means that it is not harmful to the eyes.
  • The laser distance measurer can be used to measure distances, lengths, heights, and areas.
  • The laser distance measurer also has a built-in inclinometer, which can be used to measure angles.

I hope this manual has been helpful. Please feel free to contact Parkside customer service if you have any further questions.

Comments

Post a Comment

Popular posts from this blog

Honda Hhh25d: Everything You Need To Know – Specifications, Comparisons, Manuals, And Troubleshooting

Image
Honda HHH25D Information the information about the Honda HHH25D hedge trimmer: Intro The Honda HHH25D is a lightweight, powerful, and versatile hedge trimmer that is perfect for both homeowners and professionals. It features a 25cc 4-stroke engine that provides plenty of power for trimming even the thickest hedges. The HHH25D also has a number of features that make it comfortable and easy to use, such as an anti-vibration system and an adjustable handle.
Read more

Dewalt Dpn1850pp-xj: Pros And Cons, Common Issues, And Best Places To Purchase

Image
DeWalt DPN1850PP-XJ Information the information about the DeWalt DPN1850PP-XJ: Intro The DeWalt DPN1850PP-XJ is a 18 gauge pneumatic brad nailer that is designed for precision finish work. It features a compact nose design for improved accuracy and visibility, as well as a tool-free jam release mechanism for easy nail removal. The DPN1850PP-XJ also has a sequential or contact firing mode, and a magazine capacity of 100 nails. It is powered by a standard 90 PSI air compressor.
Read more